M450
TECHNICAL SPECIFICATIONS
| Dimensions (WxDxH): | 560 x 600 x 1400 mm |
| Print Envelope (WxDxH): | 145 x 168 x 390 mm |
| System Weight: | 250 kg |
| Laser Type: | 6 x 200 W direct diode lasers |
| Laser Wavelength: | 976 nm |
| Total Laser Power: | 1200 W |
| Power Input: | 208 / 230 V single phase or 400 V three phase |
| Power Consumption: | 2 – 5 kW peak depending on selected options |
| Process Control: | Closed-loop, laser and wire modulation |
| Enclosure: | Laser-safe, sealed, controlled atmosphere |
| Interface: | USB, ethernet, wireless datalink |
| Cooling: | Active water-cooled chiller included |
| Wire Feedstock Diameter: | 0.8 – 1.2 mm |
| Wire Feedstock Spool: | BS300 |
| Wire Feedstock Spool: | BS300 |
| Wire Materials | |
| Stainless Steels: | Excellent strength and corrosion resistance. |
| Mild Steels: | Cheap and ductile, with unparalleled machinability and weldability. |
| Carbon Steels: | High impact strength, retain hardness at high temperatures. |
| Titanium Alloys: | Highest strength to weight ratio and corrosion resistance. |
| Nickel Alloys: | High versatility, outstanding heat and corrosion resistance. |
| Copper & Aluminum: | Under Development. |
| Upgrades and Accessories | |
| Hot Wire: | Programmable power supply that preheats the material to increase the deposition rate. |
| Dual Wire: | This option allows to 3D print two wire materials sequentially with very quick wire switches. |
| Laser Alignment System: | It allows users to calibrate Meltio’s multi-laser deposition head accurately and effortlessly prior to every print. |
