| Dimensions (WxDxH): | 390 x 700 x 1025 mm |
| Print Envelope (WxDxH): | Depending on the integration |
| System Weight: | 142 kg |
| Laser Type: | 6 x 200 W direct diode lasers |
| Laser Wavelength: | 976 nm |
| Total Laser Power: | 1200 W |
| Power Input: | 208 / 230 V single phase or 400 V three phase |
| Power Consumption: | 2 – 5 kW peak depending on selected options |
| Process Control: | Closed-loop, laser and wire modulation |
| Enclosure: | Laser-safe, sealed, controlled atmosphere |
| Cooling: | Active water-cooled chiller included |
| Wire Feedstock Diameter: | 0.8 – 1.2 mm |
| Wire Feedstock Spool: | BS300 or Wire drums |
| Wire Materials | |
| Stainless Steels: | Excellent strength and corrosion resistance. |
| Mild Steels: | Cheap and ductile, with unparalleled machinability and weldability. |
| Carbon Steels: | High impact strength, retain hardness at high temperatures. |
| Titanium Alloys: | Highest strength to weight ratio and corrosion resistance. |
| Nickel Alloys: | High versatility, outstanding heat and corrosion resistance. |
| Cooper & Aluminum: | Under Development. |
| Printhead Information | |
| Printhead Unretracted Size (WxDxH): | 255 x 320 x 1045 mm |
| Printhead Retracted Size (WxDxH): | 255 x 320 x 872 mm |
| Printhead Weight: | 46.5 kg |
| Key Integration Requirements | |
| Spindle motors can handle the additional weight. |
| Deployment mechanism can be mounted without collitions. |
| 5 – 8 digital input ports available. |
| 1 – 7 digital output ports available. |
| Ability to add a NO relays to the feed hold. |
| Possibility to add safety integration (depending on the integration). |
| Laser safety windows can be mounted. |
| Ability to add feed resume/start buttons. |
| Upgrades and Accessories | |
| Dual Wire: | This option allows to 3D print two wire materials sequentially with very quick wire switches. |
| Laser Alignment System: | It allows users to calibrate Meltio’s multi-laser deposition head accurately and effortlessly prior to every print. |
