Tormach 1300PL
TECHNICAL SPECIFICATIONS
| Travels | X-Axis | 48.5 in. (1232 mm) | |
| Y-Axis | 50 in. (1270 mm) | ||
| Z-Axis | 3.9 in. (100 mm) | ||
| Maximum Feed Rate | X- and Y-Axis | 1,000 IPM (25.4 m/min) | |
| Z-Axis | 120 IPM (3.0 m/min) | ||
| Table Specifications | Table Size | 51.2 in. × 51.2 in. (1.3 m × 1.3 m) | |
| Table Type | Water Table | ||
| Material Weight Capacity | 750 lbs. (340 kg) | ||
| Liquid Capacity | 59 US Gallons (223 liters) | ||
| Machine Specifications | Machine Footprint | 78 in. × 70 in.(1.95 m × 1.7 m) | |
| Overall System Height | 55 in. (1.4 m) | ||
| Typical System Weight | 1,232 lbs. (559 kg) | ||
| Linear Motion Components | X- and Y-Axis Motor | Servo-Driven | |
| Z-Axis Motor | NEMA-23 Stepper | ||
| Guideways | Precision Linear Guideway | ||
| Power Transmission | Planetary Gear (X-Axis) 5 mm HTD Belt (Y-Axis) | ||
| Machine Construction | Water Table | Welded Steel | |
| Machine Base | Welded Steel | ||
| Gantry Bridge | Aluminum | ||
| Gantry Supports | Steel | ||
| Shop Requirements | Power Required | Single-Phase 230 Vac, 50/60 Hz, 20A breaker | |
| Air Pressure | Between 90 - 120 psi (620 kPa - 825 kPa) If air supply is greater than 120 psi (825 kPa), you must use a regulator. | ||
| Resolution and Accuracy | Resolution | 0.0005” (0.0127 mm) | |
| Repeatability | ±0.001 in. (±0.0254 mm) | ||
| Positional Accuracty | 0.005 in. / ft (130 micron / 300mm) | ||
| Torch | Plasma Source Options | Hypertherm • Powermax45 • Powermax65 SYNC • Powermax85 SYNC • Powermax105 SYNC | |
| Torch Type | Floating head with digital torch height control (THC) | ||
| Torch Features | Breakaway torch with collision detection |
